Wally big pulley stringing.

Wally big pulley stringing.

Postby mateusz.p » Fri Mar 21, 2014 11:39 pm

Hello,
Can someone help me to string big pulleys in Wally?
I tried and didn't get it right, so I better ask before try again.

Thank you,
Mat
mateusz.p
 
Posts: 7
Joined: Thu Mar 13, 2014 5:51 pm
Location: Chicago Area, IL

Re: Wally big pulley stringing.

Postby Nicholas Seward » Sat Mar 22, 2014 4:44 pm

So I start with the small pulley mounted and strung. There should be 2 free ends of string. Take one and go around the big pulley 1.25 time and take the other end and go around the other way 1.25 times. The strings should meet at the tension block or guitar tuner. Tie them on the block or tuner and tension.

There are a few pictures floating around in this forum.
Nicholas Seward
 
Posts: 738
Joined: Mon Nov 25, 2013 10:41 pm

Re: Wally big pulley stringing.

Postby Cozmicray » Sat Mar 22, 2014 6:11 pm

Wally uses classic Pull-Pull system on XY
One side of pulley pulls (in tension) while other side is relaxed

String the line thru the small pulley and
wrap top one way
wrap bottom the other way
twist the pulley so one side pays out the other pulls in

Diagram --- one piece of line -- colors for clarity
bitter ends go into tensioner

wally_wrap_jpeg.jpeg
wally_wrap_jpeg.jpeg (19.15 KiB) Viewed 22173 times


Hope this is right and helps

:D
Cozmicray
 
Posts: 126
Joined: Tue Dec 03, 2013 10:23 pm

Re: Wally big pulley stringing.

Postby mateusz.p » Sun Mar 23, 2014 6:58 am

Thank you, and image helps.
Mat
mateusz.p
 
Posts: 7
Joined: Thu Mar 13, 2014 5:51 pm
Location: Chicago Area, IL


Return to Wally

Who is online

Users browsing this forum: No registered users and 2 guests

cron