Screws placement

Re: Screws placement

Postby Nicholas Seward » Wed Jan 29, 2014 1:28 am

@Guizmo: I use an M3 on the eccentric stop.
Nicholas Seward
 
Posts: 738
Joined: Mon Nov 25, 2013 10:41 pm

Re: Screws placement

Postby tommythorn » Wed Jan 29, 2014 2:08 am

Sorry, are the M3X8s and M3X20s screws, bolts, ..? (I assume they aren't SHCS). What can I say, I'm new to this.
tommythorn
 
Posts: 90
Joined: Tue Dec 03, 2013 12:14 am
Location: Silicon Valley, CA, USA

Re: Screws placement

Postby Nicholas Seward » Wed Jan 29, 2014 2:39 am

SHCS=Socket Head Cap Screw
HHCS=Hex Head Cap Screw

All my M2 and M3s are SHCS. All the M8s are HHCS.

To me bolts are usually machine screws. On the other hand when I hear screw I don't know if it is a wood screw or a machine screw.
Nicholas Seward
 
Posts: 738
Joined: Mon Nov 25, 2013 10:41 pm

Re: Screws placement

Postby imrahil » Wed Jan 29, 2014 9:46 am

Guizmo wrote:Besides that, I don't see the limit switch and screws. :o

other side of motor arm
Motor arm v2 - desc.png
Motor arm v2 - desc.png (96.1 KiB) Viewed 60909 times
imrahil
 
Posts: 68
Joined: Thu Dec 12, 2013 10:19 am

Re: Screws placement

Postby Guizmo » Wed Jan 29, 2014 2:52 pm

Nicholas Seward wrote:@Guizmo: I use an M3 on the eccentric stop.


Sorry, my mistake :oops:
Guizmo
 
Posts: 102
Joined: Tue Dec 03, 2013 3:10 pm

Re: Screws placement

Postby imrahil » Fri Jan 31, 2014 2:37 pm

exploded hub

Hub_desc.png
Hub_desc.png (51.73 KiB) Viewed 60881 times
imrahil
 
Posts: 68
Joined: Thu Dec 12, 2013 10:19 am

Previous

Return to GUS Simpson

Who is online

Users browsing this forum: No registered users and 2 guests

cron