Old Motor Arm enhancement

Old Motor Arm enhancement

Postby Niggle » Sat Apr 12, 2014 3:56 pm

When fitting the tuning peg to the motor arm, I found it really hard to get a screw driver on the mounting screw.

There seems to be more than enough clearance to rotate the peg and move the support for the mounting screw closer to, or even into, the central well where it could protrude as much as the nyloc inserts without changing any of the stringing geometry.
Niggle
 
Posts: 84
Joined: Tue Feb 11, 2014 7:27 pm

Re: Old Motor Arm enhancement

Postby Niggle » Sat Apr 12, 2014 7:45 pm

Never mind. I found a different screwdriver that worked.
Niggle
 
Posts: 84
Joined: Tue Feb 11, 2014 7:27 pm

Re: Old Motor Arm enhancement

Postby NeoTheFox » Sun Apr 13, 2014 7:49 am

Pegs are not standart. Personally I've had to disassemble each peg reversing it and cut one part to fit them. Glad you made it :D
NeoTheFox
 
Posts: 92
Joined: Tue Jan 28, 2014 5:54 pm
Location: Moscow


Return to GUS Simpson

Who is online

Users browsing this forum: No registered users and 1 guest

cron