Calibration problem

Re: Calibration problem

Postby Thottiflette » Mon Feb 23, 2015 7:48 pm

Hi,

Sorry but it is my first printer thanks to help me.
this is a picture of my slicer option, i have change the print center but the error is the same
Image

I have also try to change z offset.
Thottiflette
 
Posts: 7
Joined: Mon Feb 16, 2015 10:36 am

Re: Calibration problem

Postby Nicholas Seward » Mon Feb 23, 2015 8:07 pm

Send me your gcode at firstname.lastname@gmail.com and I will try to track down the error.
Nicholas Seward
 
Posts: 738
Joined: Mon Nov 25, 2013 10:41 pm

Re: Calibration problem

Postby Thottiflette » Wed Feb 25, 2015 8:16 am

hi,

Have you received my gcode ?
Thottiflette
 
Posts: 7
Joined: Mon Feb 16, 2015 10:36 am

Re: Calibration problem

Postby Nicholas Seward » Wed Feb 25, 2015 9:07 am

Yeah. I just haven't gotten around to debugging.
Nicholas Seward
 
Posts: 738
Joined: Mon Nov 25, 2013 10:41 pm

Re: Calibration problem

Postby Nicholas Seward » Wed Feb 25, 2015 9:10 am

Looking at the gcode the x values are centered around 100mm. They need to be centered around 0. Change your print center to 0,0.
Nicholas Seward
 
Posts: 738
Joined: Mon Nov 25, 2013 10:41 pm

Previous

Return to LISA Simpson

Who is online

Users browsing this forum: No registered users and 2 guests

cron